Home / Products / Outdoor Luminaires

Outdoor Luminaires

Outdoor lighting can be crucial for managing security as well as aesthetics of a building. From LED strip to recessed walkovers, pavements, garden features and decking, our outdoor luminaires and lighting can be used to highlight key outdoor areas in various ways. 

  • View:
  • Grid
  • List

AU-ST324RGB24V DC IP68 RGB Flexible High Density LED Strip Light

24V DC RGB Flexible High Density LED Strip Light. IP68. High density RGB colour changing flexible LED strip. Twice as many LEDs per meter as standard LED strip. Requires 24V DC Constant Voltage LED driver. 17mm between LEDs (SMD5050). Voltage drop of 4V per 5 metres. Very low power consumption - 14.4W per metre. IP68 rating allows use in marine/boat applications. 3 year warranty.

AU-WP102100 240V IP65 30W LED Wall Pack

30W IP65 slim profile IK10 wall pack with cast aluminium base and polycarbonate diffuser. Non-dimmable luminaire with integrated LED driver. Available with microwave sensor, photocell and emergency as special. Suitable for walkways, stairways, general amenity and security areas. 3 year warranty.

AU-ANT1203A240V 1200mm Polycarbonate IP65 Single LED Non Corrosive

Range of single and twin polycarbonate LED anti-corrosive luminaires fitted with vandal resistant polycarbonate body and diffuser. For ease of installation, the diffuser is permanently attached with two clips and the gear tray is fitted with restraints. Fitting is supplied with mounting brackets for ceiling and wall mounting or suspension. Anti-tamper stainless steel clips are supplied with the luminaire. Multiple drill-out conduit entry points are fitted at the back and ends of the housing. Supplied non-dimmable as standard. Dimmable when used with appropriate driver. Replacement gear trays available. 5 year warranty.

AU-WU682/1R350mA 316 Stainless Steel IP68 Fixed 1W LED Marker Light

IP68 Low voltage 316 stainless steel 1W LED marker light. Push-fit securing method . White LED (Due to the nature of LEDs a slight colour variation from lamp to lamp is possible). NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations. Submersible to a depth of 1m. Cool operating temperature. Fitted with 1m of rubber cable for connection to a 350mA constant current LED driver (N.B. to be wired in SERIES). Maximum 9pcs connected to a 9W constant current LED driver. Product is available with Blue LEDs and White LEDs. AU-WU682SL - mounting sleeve for in ground installation available. Dimmable with AU-LEDD16CC driver and AU-DSPLED dimmer unit.

AU-ANT1204A240V 1200mm Polycarbonate IP65 Twin LED Non Corrosive

Range of single and twin polycarbonate LED non-corrosive luminaires fitted with vandal resistant polycarbonate body and diffuser. For ease of installation, the diffuser is permanently attached with two clips and the gear tray is fitted with restraints. Fitting is supplied with mounting brackets for ceiling and wall mounting or suspension. Anti-tamper stainless steel clips are supplied with the luminaire. Multiple drill-out conduit entry points are fitted at the back and ends of the housing. Replacement gear trays available. 5 year warranty.

AU-WU682/1SQ350mA 316 Stainless Steel IP68 Fixed 1W LED Marker Light

IP68 low voltage 316 stainless steel 1W LED marker light. Push fit securing method . White LED (Due to the nature of LEDs a slight colour variation from lamp to lamp is possible). NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations. Submersible to a depth of 3.3ft / 1m. Cool operating temperature. Fitted with 3.3ft / 1m of rubber cable for connection to a 350mA constant current LED driver (N.B. to be wired in SERIES). Maximum 9pcs connected to a 9W constant current LED driver. Product is available with Blue LEDs and White LEDs. AU-WU682SL - mounting sleeve for in ground installation available. Dimmable with AU-LEDD16CC driver and AU-DSPLED dimmer unit.

AU-ANT1503A240V 1500mm Polycarbonate IP65 Single LED Non Corrosive

Range of single and twin polycarbonate LED non-corrosive luminaires fitted with vandal resistant polycarbonate body and diffuser. For ease of installation, the diffuser is permanently attached with two clips and the gear tray is fitted with restraints. Fitting is supplied with mounting brackets for ceiling and wall mounting or suspension. Anti-tamper stainless steel clips are supplied with the luminaire. Multiple drill-out conduit entry points are fitted at the back and ends of the housing. Replacement gear trays available. 5 year warranty.

AU-WU673/1R700mA 316 Stainless Steel IP68 Fixed 3W LED Marker Light

IP68 low voltage 316 Stainless Steel LED marker light. Corrosion resistant for use in coastal areas. Push-fit securing method. Submersible to a depth of 3.3ft / 1m. Fitted with 3.3ft / 1m of rubber cable for connection to a 700mA constant current LED driver.

AU-ANT1504A240V 1500mm Polycarbonate IP65 Twin LED Non Corrosive Light

Range of single and twin polycarbonate LED non-corrosive luminaires fitted with vandal resistant polycarbonate body and diffuser. For ease of installation, the diffuser is permanently attached with two clips and the gear tray is fitted with restraints. Fitting is supplied with mounting brackets for ceiling and wall mounting or suspension. Anti-tamper stainless steel clips are supplied with the luminaire. Multiple drill-out conduit entry points are fitted at the back and ends of the housing. Replacement gear trays available. 5 year warranty.

AU-WU104350mA 316 Stainless Steel IP68 Fixed 1W LED Marker Light

IP68 Low voltage 316 stainless steel marker light. Corrosion resistant for use in coastal areas. High power CREE LED. Ideal for use as a marker light in decking, patios, walkways etc.. Submersible IP68 rated for use in pools, ponds, shower cubicles etc.. Supplied with 1m rubber cable. Requires a 350mA LED driver (not included).

AU-WU10524V DC 316 Stainless Steel IP68 Fixed 1W LED Marker Light

IP68 Low voltage 316 stainless steel ground light. Corrosion resistant for use in coastal areas. High power CREE LED's . Ideal for use as a marker light in decking, patios, walkways etc.. Submersible IP68 rated for use in pools, ponds, shower cubicles etc.. Supplied with 1m rubber cable. Requires a 24V DC LED Driver (not included). Non-dimmable.

AU-ANT1570A240V 1500mm Polycarbonate IP65 Triple LED Non Corrosive Light

IP65 vandal resistant polycarbonate LED anti-corrosive fitting - ideal for kitchens, car parks, boiler rooms, factories & farm buildings. Replicates T8 light distribution (excellent vertical and horizontal illumination). Anti-tamper 316 stainless steel clips supplied as standard. Engineered LED light engine maximises light distribution and uniformity. Reduced glare diffuser. 20mm conduit knockout entry points. IK08 impact rating. Replacement gear trays available - contact sales office for details. (L70) at a 40,000 hour lifetime. Emergency versions available. 5 Year Warranty – see www.auroralighting.com for details

AU-WU106350mA 316 Stainless Steel IP68 Fixed 1W LED Marker Light

IP68 Low voltage 316 stainless steel marker light. Corrosion resistant for use in coastal areas. High power 1W CREE LED. Toughened glass lens. Ideal for use in decking, patios, walkways etc.. Submersible IP68 rated for use in pools, ponds etc.. Supplied with 3m rubber cable. Mounting sleeves - AU-MS50 for AU-WU106. Requires a 350mA constant current LED driver (not included).

AU-WU300350mA 316 Stainless Steel IP68 Fixed 3W LED Marker Light

IP68 Low voltage 316 stainless steel marker light. Corrosion resistant for use in coastal areas. High power 3W CREE LED. Toughened glass lens. Ideal for use in decking, patios, walkways etc.. Submersible IP68 rated for use in pools, ponds etc.. Supplied with 3m rubber cable. Mounting sleeve available - AU-MS65 for AU-WU300. Requires a 350mA constant current LED driver (not included).

AU-WU021240V GU10 Stainless Steel IP65 Fixed Round Recessed Walkover Light

IP65 Halogen 304 stainless steel walkover light. Loop-in, loop-out cable glands. GU10 lampholders included for mains applications. Supplied with clear and optional frosted cover glasses. LED lamps recommended due to cool operating temperature. Suitable for floor and decking mounting . Supplied with mounting sleeve for in-ground and solid floor installation. N.B. Cut-out dimension shown is for deck mounting (no mounting sleeve). Cut-out dimension with sleeve is 84mm. Cut-out dimension without sleeve is 76mm.

Displaying results 1-15 (of 44)
 |<  < 1 - 2 - 3  >  >| 

Join Our Mailing List

The latest news & special offers, right to your inbox!

Don't worry. We know you value your privacy, which is exactly why we won’t share your information with anyone else.

Connect Across the Web

Connect & Share:

View Photos & Videos:

Browse Catalogues:

Registered UK Address: Aurora Ltd | 16 Alban Park | Hatfield Road | St. Albans | AL4 0JJ | England

TEL: +44 (0) 1727 83 66 11 | FAX: +44 (0) 1727 83 66 22

© 1999 - 2016 auroralighting.com

France

Select Location & Language

Aurora Lighting is a global organization serving markets around the world. Please select your region, or click below to visit our Global site to view our 2,500 products: