Single colour super bright IP68 flexible dimmable LED strip with self-adhesive backing (must be applied to clean surfaces). IP68 rating allows for use in marine / boat applications. Any joints or termination points are maximum IP65 rated. With a beam angle of 120° and 8mm between LEDs, individual light points are less visible creating a continuous glow. For runs over 10m individual length should be connected in parallel. Very low power consumption of 9.6W per metre. A 24V DC Constant Voltage LED driver is required (see driver options table). Reel length 10m.
3 year warranty.
High density single colour flexible LED strip with self adhesive backing (must be applied to clean surfaces). Twice as many LEDs per metre as standard LED strip . Ideal for fast installation into many applications including signs, displays and pelmets. Cut point every 50mm. 8mm between LEDs. Beam angle 120º. Voltage drop of 4V per 5 metres. For runs over 5m individual lengths should be connected in parallel**. Very low power consumption - 9.6W per metre. Copper track for effective heat dissipation and long life. Requires 24V DC Constant Voltage LED driver. Dimmable with AU-LED100CH124 dimmable LED driver. Please order to the nearest metre (reel length 30m). 8mm between LEDs (SMD3528). Maximum length of run 10m. Dimmable with AU-LED100CH124 dimmable LED control unit & LED driver.
AU-ST324 Connector Kit includes:
24V 0.5m/1.64ft Power leads x 2.
End caps x 2.
Heat shrink sleeves x 4.
Sealant tube x 1.
Fixing clips x 20.
Fixing screws x 20.
Wired connector (10cm) for joining two pieces of AU-ST224.
Flexible inter-connection connector for joining two pieces of AU-ST224.
Connector for joining two pieces of AU-ST224.