Connector for joining RGB LED strip.
Wired RGB connector for the connection of RGB strip. Fitted with 20cm cable.
Flexible inter-connection lead (20cm)for joining two pieces of AU-ST224RGB.
90W DMX RGB Sub Controller
60W DMX RGB Sub Controller
High density RGB colour changing flexible LED strip with self adhesive backing (must be applied to clean surfaces). Twice as many LEDs per metre as standard LED strip . Single RGB LED chip allows programmable settings including static colours and colour changing modes dependant on the control system used. Cut point every 100mm. 17mm between LEDs. Voltage drop of 4V per 5m. For runs over 5m individual lengths should be connected in parallel*. Very low power consumption - 14.4W per metre. Copper track for effective heat dissipation and long life. Please order to the nearest metre (reel length 30m). 17mm between LEDs (SMD5050).
12V DC RGB Flexible LED Strip Light/
RGB colour changing flexible LED strip with self adhesive backing.
Single RGB LED chip allows programmable setting including static colours and colour changing modes, dependent on the control system used.
Requires 12V DC Constant Voltage LED driver.
35mm between LEDs (SMD5050).
Voltage drop of 2V per 5 metres.
Very low power consumption - 6W per metre.
3 year warranty.
Connector for joining AU-ST101RGB LED strip.
Wired RGB connector for the connection of AU-ST101RGB led strips. Fitted with 20cm cable.
Flexible inter-connection lead (20cm)for joining two pieces of AU-ST101RGB.
DMX control switch allows control of colour changing RGB strip or lamps in bars, restaurants and domestic applications.Three switches to select colour, dim / fade and 12 programmes including light to sound activation using the built-in microphone.Single static colour can be manually mixed and dimmed (almost any colour can be achieved).Colour changing time delay (5 seconds - 60 minutes) and fade speed (smooth fade or switching between colours) can be altered to suit the application.Use to control up to 30 x AU-DMX060 or AU-DMX090 RGB controllers.Includes DMX power supply.Fits a 35mm deep (minimum) 2 gang surface or recessed mounting box